Solution
Summary
Haoru Technology integrates ultra-wideband (UWB) automatic following into customer owned hotel linen and housekeeping carts to reduce repeated pushing, trips to retrieve supplies and parking adjustments. The cart follows a designated staff member along floor corridors and waits outside each room. Existing compartments for clean linen, supplies and collected items are retained to support continuous housekeeping work.
Application Background
Housekeeping staff push a service cart from room to room. It carries clean linen, guest supplies, cleaning tools and collection bags. Staff repeatedly move between the room and cart before pushing it to the next location.
Room assignments, cleaning order and additional service requests frequently change. The cart needs to move with the staff member's task. The customer wants to retain its storage layout while adding powered motion and following to reduce pushing and fit cart parking into the service routine.
Project Challenges
1. Floor corridors serve both guests and housekeeping. Following speed and parking positions must keep doorways and corners available.
2. When staff enter a room, the cart must wait rather than continue following inside. Pause, waiting and restart procedures must be explicit.
3. Linen bags and supplies alter the center of gravity and can obstruct signals. The retrofit must preserve compartments and be tuned under different loading conditions.
Haoru Technology Solution
Haoru Technology assesses the customer's cart frame, wheels, braking and power arrangements, then configures UWB following modules, a controller and compatible drive components. Existing clean and used linen compartments and supply access are retained, with collection points clearly marked by category and handling order. Base stations are mounted where bags and metal shelves do not obstruct them.
A staff member carries the following tag, and the cart uses relative distance and direction to move along the corridor. Outside a guest room, the operator pauses following and parks at the agreed service position before entering. Following is restarted when leaving for the next room.
Obstacle detection is configured for the cart dimensions and corridor. The selected response is obstacle-triggered stopping, with remote adjustment and manual takeover retained. Staff confirm movement through narrow locations and corners. Room entry, elevator use and travel between floors remain outside ordinary following control. Starting, turning and stopping are checked under different loads.
How It Works
1. Select the target: the staff member carries the tag associated with the cart and enables corridor following.
2. Acquire relative position: vehicle mounted UWB modules measure tag distance and direction, allowing the controller to adjust speed and steering.
3. Park for service: staff pause following and leave the cart at the designated waiting position, keeping the corridor and doorway usable.
4. Continue to the next room: restart after supply handling and collection. The cart stops for detected obstacles, with manual takeover at special locations.
Solution Advantages
1. The cart follows the actual cleaning sequence, accommodating changes and room by room work.
2. Retaining existing compartments keeps cleaning supplies and clean and used linen in defined locations, reducing the adjustment required after retrofit.
3. Pause, waiting and takeover procedures connect corridor movement with work inside each room.
Final Results
Time spent manually pushing and pulling carts during floor service decreased by 60%. Powered following handles corridor travel.
Trips away from the work point to locate or retrieve the cart decreased by 40%. The cart moves with staff and waits at an agreed position, reducing cases where it remains at the previous room.
Corrections for mixed clean and used linen decreased by 50%. Clear compartments and fixed collection locations reduce mixing during handling.
